Automatic Filling Machine

• Weight: 500kg
• Capacity: 100kg
• Usage: Filling milk in packets

• Durable
• Safety standards maintained
• Reliable and cost-effective

Infeed Conveyor / Air Blow Conveyor:

• 4 feet long infeed conveyor with S.S. guided. Empty bottles have to be loaded manually on this conveyor
• The bottles are automatically picked by the rinsing rotor, using spring loaded grippers. Bottles are inserted automatically to start the rinsing cycle which in most cases used product water as the rinse medium. Mechanical rinse valve provides the feature, which safeguards against wastage of treated water. Then after bottles are held at the neck, there is no distortion of the bottle profile. At the end of the rinsing cycle, the bottle is drained of most residual water, before being straightened out and handed over to the filling rotor

Filling System (6 Head):

• Automatic Pet Filling Machine fills every bottle to the desired volume adopting the Vent pipe filling principle for accurate filling.The mechanical spring loaded filling valves are actuated automatically by the bottles when lifted up to commence filling.In this stage again the bottles are held at the neck by neck holding lifters. The machine operating speed can be varied using variable speed AC drive

Capping System (3 Head):

• In capping system, the bottles held at the neck firmly during capping to produce absolutely leak proof results. Caps are feed into the machine by an automatic cap elevator with an SS
• 304 ground level hopper which can accommodate up to two thousand caps. The cap elevator feed caps at the desired rates to the cap pickup rotor of the machine

Outfeed Conveyor:

• 16 feet long SS slat conveyor with SS guide

• Automatic Grade: Fully Automatic
• Filling Valve Head: Multi-Head
• Dosing Device: Filling Valve

Additional Information:

• Item Code: RFC
• Pay Mode Terms: D/A,T/T (Bank Transfer)
• Port of Dispatch: MUMBAI
• Production Capacity: 20PIECE per MONTH
• Delivery Time: 15 DAY
• Packaging Details: PACKING IN WOODEN BOX

• Feeding System: Auger Filler / Weigh Filler / Volumetric Cup Filler
• 420 V, AC, Three-Phase, 30 Hz
• Packing Film: Any Heat Sealable Laminate
• Temperature Controller: PID
• Pouch Size and product weight to be filled)

• Durable
• Safety standards maintained
• Reliable and cost-effective

• Packing Material: Heat Sealable Laminated Films
• Filling Style: Controlled by Auger Filler
• Roll Width: Min. 120 mm, Max – 425mm
• Pouch Type: Center Seal Pouch
• Height : 65 300 mm
• Electrical Supply: 230 V / A.C / Three Phase / 50 Hz
• Power Consumption: 3kW
• Compressed Air Required: 6 CFM @ 6 Bar
• Weight: Approx. 750 Kgs.
• Machine Dimension: L 1050mm, W 990 mm, H 1360 mm

• Durable
• Safety standards maintained
• Reliable and cost-effective